TMO - Time-resolved AMO
The Time-resolved atomic, Molecular and Optical Science (TMO) instrument (NEH 1.1), one of the three new LCLS-II instruments with a energy range from 0.25 to 2 keV, will support a wide range of science including gas phase photochemistry, attosecond electron dynamics, and the study of nanoscale systems. TMO will support an array of experimental techniques and features two X-ray focus positions. The NEH beamline 1.1 science end station, will be configured to take full advantage of both the high per pulse energy from the copper accelerator (120 Hz) as well as high average intensity and high repetition rate (1 MHz) from the superconducting accelerator.
Endstation Descriptions
The initial TMO focus spot or interaction point, IP1, is optimized for performing high energy, high resolution, time-but also angular-resolved photoelectron spectroscopic measurements. This interaction point features an array of standardizied, modular endstations. Depending on the photon energy, IP1 X-ray photon fluence can reach the high 1019 photons/cm2 range with superconducting Linac, and high 1020 photons/cm2 range with copper accelerator at 120 Hz.
The second TMO focus spot (IP2) features the new Dynamic REAction Microscope (DREAM) endstation which is a reaction microscope (or COLTRIMS type) spectrometer as a standard configuration. A second set of focusing mirrors defocus the IP1 spot to produce sub-mircon x-ray focal spots. The reaction microscope techniques is well suited for accumulating data on the event-by-event basis at the rep rates in excess of 100 kHz fully utilizing the LCLS-II capabilities. Photon fluence in IP2 will reach beyond 1021 photons/cm2 with superconducting Linac X-rays, while with copper accelerator it will be over 1022 photons/cm2 at 120 Hz.
Pump-probe timing resolution of X-ray with optical laser pulses can be expected to exceed 10 fs for both endstations.
Specifications
Parameter | Value |
---|---|
Undulator Source | SXU |
Photon Energy Range | 250-2000 eV |
Focused Beam Diameter (FWHM) | < 1.5 μm (IP1) & < 300 nm (IP2) |
X-ray Bandwidth | 3 × 10−3 1 × 10−4 (seeded) |
Beamline Transmission | ~ 80% (IP1) & ~ 60% (IP2) |
Repetition Rate | up to 929 kHz |
X-ray Power Limit | 200 W |
Optical Laser | 200 nm to 17 μm with varying power, repetition rate, and pulse duration |
Primary X-ray Techniques |
|
Advisory Panel
- Christoph Bostedt - PSI, ETH Zurich
- Reinhard Dörner - Frankfurt
- Gilles Doumy – Argonne
- Oliver Gessner - LBNL - CSD
- Markus Guehr - U. Potsdam
- Daniel Rolles - KSU
- Thorsten Weber - LBNL - CSD
- Nora Berrah - U. Conn
- Adrian Cavalieri - MPSD, CFEL, U. Hamburg
- Jon Marangos - ICL
- Artem Rudenko - KSU
- Richard Squibb - GU
TMO INSTRUMENT TEAM
James Cryan
TMO Instrument Lead Scientist
(650) 926-3290
jcryan@slac.stanford.edu
Justin James
Beamline Engineer
(650) 926-3842
jhjames@slac.stanford.edu
Ming-Fu Lin
TMO Scientist
(650) 926-2586
mfucb@slac.stanford.edu
Razib Obaid
TMO Scientist
robaid@slac.stanford.edu
Thomas Wolf
TMO Scientist
(650) 926-2533
thomas.wolf@slac.stanford.edu
Taran Driver
TMO Scientist
tdd14@slac.stanford.edu
Xiang Li
TMO Scientist
xiangli@slac.stanford.edu
Mike Glownia
Laser Scientist
jglownia@slac.stanford.edu
Ruaridh Forbes
Laser Scientist
ruforbes@slac.stanford.edu
Mat Britton
Laser Scientist
matb@slac.stanford.edu
Jeff Aldrich
Area Manager
jaldrich@SLAC.Stanford.EDU